Certifications

The company possesses following certifications, qualifications and procedures:

  • Repair, assembly and reconstruction of classified technical devices (Work on technical devices including dismantling, removal of the defects and faults, reconstruction and assembly for ensuring its functionality and safety.
    • Pressure equipment (Category A)
      • A technical device which is fired or otherwise heated which is subject to the risk of overheating and is intended for the production of steam or for heating liquids with a temperature higher than the boiling point at pressure of 0.05 MPa: A steam boiler with a nominal quantity of steam produced of 8 t/h or and a liquid boiler with a heat output of 5,8 MW or (Class IV),
      • A stationary pressure vessel whtich contains hazardous gases or hazardous liquids at any temperature having a maximum permissible pressure exceeding 0.05 MPa, a volume exceeding 1 litre and a safety coefficient exceeding 5,
      • Pipelines with a nominal inner pipe diameter of greater than DN 25 and pipelines for distributing hazardous liquid with a maximum permissible pressure of greater than 1 MPa with which the product of the maximum permissible pressure and nominal inner diameter DN is greater than 200 .
    • Pressure equipment (Category B)
      • A technical device which is fired or otherwise heated which is subject to the risk of overheating and is intended for the production of steam with a nominal pressure of 0.05 MPa or for heating liquids at a temperature lower than the boiling point with a nominal heat output above 100 kW (Class V)
  • Pressure equipment repair (Category B)
    • Liquid and steam boilers (Class V)
    • Pipelines (Class I)
    • Pipelines (Class II)
  • Qualification to use fluorinated greenhouse gases according to regulations (ES) 842/2006, 303/2008 and Act no. 286/208-77
  • Approved welding procedures WPQR
    • Austentic steel (Class 8.1)– without limitations

Cerfiticates

European Regional Development Fund

MPM steel s. r. o. received the financal contribution from the European Regional Development Fund.

Learn more

Contact

Address
MPM steel s. r. o
Oravská Poruba 370
027 54 Oravská Poruba
Slovakia

Abstract of record »
Registration ID: 444 949 55
VAT ID: SK202 272 486 9

Telephone number/Fax
+421 43 588 25 07

E-mail
info@mpmsteel.sk

Contact us via contact form »

Map location
GPS: 49.192053, 19.267883‎
49° 11' 31.39"N, 19° 16' 4.38"E

See our location on a map with Google Maps »

Bank account
Bank: ČSOB a.s.
IBAN: SK5775000000004023415266
Account number: 4023415266/7500